Photometric data for both the 3000K and 5500K Image Spot LED HO gobo projectors.
Products on this page may not be available in your region.
With 75W of power, the Image Spot HO LED projector provides an incredible amount of light output from a versatile and compact design. The fixture’s crystal clear optics ensure bright imaging in virtually any environment, and enable vivid gobo projection up to 75ft. (22m) away!
Image Spot HO is IP65 rated, allowing it to be used indoors or outdoors. Available in cool white (5500K) or warm white (3000K) options, Image Spot HO is easy to install in any environment.
Please note that the Image Spot HO requires an external driver for operation and does not ship with a lens. Make sure to choose the Image Spot HO Driver Accessory that fits your control protocol and the proper Lens Optic Accessory when ordering to meet your project requirements.
The 75W LED array inside the Image Spot HO produces up to 2,900 lumens of output. The fixture combines its powerful output with engineered optics to produce a light beam with the highest uniformity and resolution. This enables the Image Spot HO to project crisp gobo imagery at distances up to 75ft. (22m) away!
Use the Image Spot HO to project any Rosco pattern – from the world’s largest library of standard gobo designs – or, project a custom gobo with a specific image, logo or message. The Image Spot HO is ready to accept steel, black and white & color glass gobos, and even thicker Effects Glass gobos such as Image Glass and ColorWaves. The fixture’s gobo cassette also accepts Rosco Permacolor dichroic glass filters for long-term color effects, correction or enhancement.
The IP65 rated Image Spot HO offers the versatility to project gobos anywhere and everywhere they may be required. The external drivers needed to power the Image Spot HO are also IP65+ rated, enabling the fixture to be used indoors or outdoors.
Image Spot HO necessitates an external driver. Four drivers are available – a DMX driver, a three-in-one driver that offers 0-10 VDC, 10V PWM, and resistance dimming options, a driver that provides control via DALI protocols, and a driver that offers manual control via an onboard potentiometer.
Image Spot HO Driver, Dimmable, 3-in-1
Image Spot HO Driver, Dimmable, DALI
What’s In The Box:
Please note that the Image Spot HO requires an external driver for operation and does not ship with a lens. Make sure to choose the Image Spot HO Driver Accessory that fits your control protocol and the proper Lens Optic Accessory when ordering to meet your project requirements. Lens options include: 10°, 19°, 25° and 30°. Click on Photometrics tab above or download the Image Spot HO Photometrics Data Sheet for more information.
Input Voltage: |
Minimum 39VDC (from external driver) |
Power Consumption: |
75 Watts at maximum output |
Color Temperature Options: |
5500K or 3000K |
CRI: |
5500K Model: 80 |
Output: |
5500K Model: 2900 lumens estimated |
Lumen Maintenance: |
50,000 hours at 45°C (LM-79-08) |
Power Connection: |
6.5 ft (2m) hybrid data/mains cable (IP65) (IP68 cable joiner included for connection from fixture to external driver) |
Data: |
DMX, 0-10VDC, 10V PWM, 10K resistance, DALI, |
Dimensions: Image Spot HO (including yoke): |
8.9 in x 4.8in x 6.8 in (228mm x 123mm x 172.5mm) |
Weight: |
Image Spot HO: 4.4lbs (2kg) |
Operating Temperature: |
-13° to 104° F (-25° to 40° C) |
Humidity: |
0-95% non-condensing |
Housing: |
Anodized Aluminum Extrusion |
Approvals: |
ETL / UL Standards #62368-1 and #60950-22 |
Image Spot HO Gobos & Permacolor Filters:
For optimum image quality and performance, use Rosco Image Spot Gobos and Permacolor Filters, which feature custom bezels that enable a secure fit inside the Image Spot gobo cassette.
Standard Gobos
XXXXX-SPOT Image Spot Standard Gobo, XXXXX = The five digit standard gobo number
Custom Gobos
2507210ISPOT Image Spot Custom Steel Gobo
260CUSBWOSPO Image Spot Custom B&W Glass Gobo
260CUS1COSPO Image Spot Custom One-Color Glass Gobo
260CUS2COSPO Image Spot Custom Two-Color Glass Gobo
260CUSMCOSPO Image Spot Custom Multi-Color Glass Gobo
Permacolor Dichroic Filters
1203-XXXX-SPOT Image Spot Permacolor Dichroic Glass Filter, XXXX = the four digit color number (includes bezel to fit inside gobo cassette)
Product Numbers
296400030651 - Image Spot HO 3000K IP65, Black, No Lens
296400050651 - Image Spot HO 5500K IP65, Black, No Lens
Rosco Image Spot® Photometrics Calculator
Rosco Image Spot® HO DWG File
Image Spot® HO 3000K IES File - Narrow 19°
Image Spot® HO 3000K IES File - Medium 25°
Image Spot® HO 3000K IES File - Wide 30°
Image Spot® HO 3000K LDT File - Very Narrow 10°
Image Spot® HO 3000K LDT File - Narrow 19°
Image Spot® HO 3000K LDT File - Medium 25°
Image Spot® HO 3000K LDT File - Wide 30°
Image Spot® HO 5500K IES File - Very Narrow 10°
Image Spot® HO 5500K IES File - Narrow 19°
Image Spot® HO 5500K IES File - Medium 25°
Image Spot® HO 5500K IES File - Wide 30°
Image Spot® HO 5500K LDT File - Very Narrow 10°
Image Spot® HO 5500K LDT File - Narrow 19°
Image Spot® HO 5500K LDT File - Medium 25°
Image Spot® HO 5500K LDT File - Wide 30°
Designing With Image Spot®
Case Study: Using Gobo Projections To Create Vivid Images On Building Façades
Photometric data for both the 3000K and 5500K Image Spot LED HO gobo projectors.
Please complete this form
A 75W LED AC/DC driver featuring constant current mode and high voltage output. Operating from 100~305VAC and contained in an IP67/65 metal housing provides the flexibility needed for both indoor and outdoor applications. The driver offers 3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance).
Specifications:
Power input: |
75W, 100-305 VAC |
Output: |
1400mA, 27-54VDC |
Power factor: |
PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC (full load) |
Efficiency: |
90% |
Dimensions: |
7 in x 2.5 in x 1.4 in (180mm x 63mm x 35.5 mm) |
Weight: |
1.5lbs (.68kg) |
Power & data connections: |
Unterminated leads 12in. (300cm) |
IP rating: |
IP65 |
Dimming range: |
8~100% |
Dimming control: |
0-10V/PWM/Resistance built-in potentiometer |
A 75W LED AC/DC driver featuring constant current mode and high voltage output. Operating from 100~305VAC and contained in an IP67/65 metal housing provides the flexibility needed for both indoor and outdoor applications. The driver offers DALI control technology.
Specifications:
Power input: |
75W, 100-305 VAC |
Output: |
1400mA, 27-54VDC |
Power factor: |
PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC (full load) |
Efficiency: |
90% |
Dimensions: |
7 in x 2.5 in x 1.4 in (180mm x 63mm x 35.5 mm) |
Weight: |
1.5lbs (.68kg) |
Power & data connections: |
Unterminated leads 12in. (300cm) |
IP rating: |
IP67 |
Dimming range: |
8~100% |
Dimming control: |
DALI control technology |
A 75W LED AC/DC driver featuring constant current mode and high voltage output. Operating from 100~305VAC input and contained in an IP65 metal housing provides the flexibility needed for both indoor and outdoor applications. The driver offers dimming adjustment through a built-in potentiometer on the back of the driver.
Specifications:
Power input: |
75W, 100-305 VAC |
Output: |
1400mA, 27-54VDC |
Power factor: |
PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC (full load) |
Efficiency: |
90% |
Dimensions: |
7 in x 2.5 in x 1.4 in (180mm x 63mm x 35.5 mm) |
Weight: |
1.5lbs (.68kg) |
Power & data connections: |
Unterminated leads 12in. (300cm) |
IP rating: |
IP65 |
Dimming range: |
8~100% |
Dimming control: |
Onboard potentiometer |
A 75W LED AC/DC driver featuring constant current mode and high voltage output. Operating from 90~305VAC and contained in an IP67 housing provides the flexibility needed for both indoor and outdoor applications. The driver offers DMX control technology with RDM compatibility for addressing.
Specifications:
Power input: |
90-305 VAC |
AC Current Input: |
0.8A max @ 120Vac & Full Load; |
Output: |
1400mA, 32-71VDC |
Power factor: |
PF _0.98/120VAC, PF_0.97/220VAC, PF_0.92/277VAC (full load) |
Efficiency: |
87% |
Dimensions: |
5.16 in x 2.66 in x 1.32 in (131 x 67.5 x 33.5mm)(body) |
Weight: |
1.4lbs (.65kg) |
Power/data connections: |
Unterminated leads 12 in. (30cm), |
Approvals: |
Compliant with Safety Extra Low Voltage (SELV) standard. |
Lifetime: |
100,000 Hour at <75°C |
IP rating: |
IP67 |
Dimming control: |
DMX (RDM compatible) |
Channels: |
1 |
Dimming range: |
10%~100% |
The different Image Spot Lens Optics provide a range of long to short projection capabilities with varying image diameters. Each Image Spot Lens Optic is designed to receive the optional Image Spot Lens Cover that prohibits water & debris from entering the front of the optic. This easy-to-access filter chamber is also useful for installing one of the diffusion filters found in the optional OPTI-FLECS Filter Pack.
Specifications:
Available colors: Black, Silver
Available beam angles: 10°, 19°, 25°, 30°
The Very Narrow - 10° Lens enables the longest projection capability.
Image Diameter = 3.8’ (2m) @ 20’ (6m) distance.
The Narrow - 19° Lens enables long projection capability with broader image.
Image Diameter = 6.6’ (2m) @ 20’ (6m) distance.
The Medium - 25° Lens supports mid-range projections.
Image Diameter = 7.9’ (2.4m) @ 20’ (6m) distance.
The Wide - 30° Lens produces the widest beam spread, making it the best for short throws.
Image Diameter = 8.2’ (2.5m) @ 20’ (6m) distance.
Product Numbers:
3’ (1m) safety cable with convenient threaded connector designed to wrap around the fixture’s mounting point to provide security for any Image Spot installation.
The Rosco Pole Mount is a rugged mounting accessory for attaching Rosco Projectors and Rosco Cube products to interior or exterior round poles.
Powder-Coated Steel support that provides rigid attachment and a clean, mounted installation.
1-3/5” (42mm) open tubing provides room for power/data cables for a clean installation.
Pole Mounts attach to any round structure via Stainless Steel Straps (kit sold separately).
Product Numbers:
The Rosco Wall Mount allows for mounting Rosco Projectors and Rosco Cubes to interior or exterior vertical surfaces.
Powder-Coated Steel support that provides rigid attachment and a clean, mounted installation.
1-3/5” (42mm) open tubing provides room for power/data cables for a clean installation.
Product Numbers:
The Rosco Surface Mount allows for mounting Rosco Projectors and Rosco Cubes to interior or exterior horizontal surfaces.
Powder-Coated Steel support that provides rigid attachment and a clean, mounted installation.
1-3/5” (42mm) open tubing provides room for power/data cables for a clean installation.
Product Numbers:
Your request is important to us.
We will respond as soon as possible during regular business hours.
Need help right away? Check out our frequently asked questions page here: FAQs